KUA recommends that our customers interested in installing a solar PV system schedule a KUA audit for free solar energy before purchasing a system. Our solar home energy audit is designed to educate our customers about the facts and myths regarding solar PV and provide them with beneficial tools when buying a solar PV system. It is important to note that photovoltaic solar energy only works when the sun is shining. Unless a battery backup system is installed, the home should always rely on utility to meet its energy needs at night or when the sun isn`t shining. There are two options that can help balance the amount of energy you use at night. There is no additional monthly fee for customers who have installed a solar PV system. Adding additional panels is an option if the system does not produce enough to meet the energy needs of the home. But often we find that it`s more cost-effective to make other energy-efficient improvements to the home rather than just adding more panels. We strongly recommend that our customers schedule a free home energy audit to evaluate the best course of action and get the best value for money. KUA offers a net metering program to purchase the customer`s surplus renewable generation. We do not currently offer discounts or incentives to customers to purchase solar PV systems. If you have any questions about installing an RGS at your site, please contact the KUA Green Team in kuagreenteam@kua.com or call 407-933-9800.
All three documents must be submitted before we can begin processing the customer`s interconnection request. These documents can be completed and submitted by the client, but in most cases, the contractor assists the client in completing these documents. Once the interconnection application has been fully approved by KUA and the system has received final approval from the city or county licensing authority, we will terminate the two-way meter and the system will be free to connect to the network. Solar PV systems without a backup battery cannot be used in the event of a KUA failure. The upstrap is required by the code to disconnect the system in the event of a power failure. This safety requirement is designed to prevent the system from supplying the grid with energy and potentially injuring line workers who repair the outage. It is also designed to prevent power surges from damaging the customer`s engine loads in the home. If a backup battery is installed, the system can continue to operate separately from the mains and use the batteries as a buffer to protect the customer`s motor charges. During the day that the solar photovoltaic system produces, the system first covers the energy needs of the house and the excess energy is sent to charge the batteries.
When the battery system is fully charged, the excess energy flows through the meter to the KUA power grid. At night, when the solar photovoltaic system does not produce, the house derives its initial energy needs from the battery system. If the house consumes more energy than the battery system can provide, that extra energy comes from the power grid. The best way to get the most out of your solar PV system is to work on making the home as energy efficient as possible and balancing the load. Energy-efficient upgrades can help reduce the amount of utility energy the home consumes at night when the PV system is not producing. Load balancing refers to the execution of more motor loads in the house during the day. Run the washer, dryer, dishwasher, pool pump, etc. during the day with the energy of the sun instead of running it on electricity at night. As a customer, you will receive an invoice detailing all charges/charges for electricity in addition to the normal services and taxes associated with your account. It is important to note that photovoltaic solar energy does not produce energy at night. Any energy consumed in the house at night is provided by KUA.
Oversizing the system to bring more energy into the grid during the day than the house consumes at night can offset the electricity bill, but since most systems are proportional to the home`s energy consumption and not oversized, load balancing becomes the best option for most customers. Most solar inverter companies offer an app or website to monitor the production of the system. The solar PV contractor should be able to help set up this type of system monitoring. No, our meter only monitors the energy consumed by the utility (at night when the system does not produce) and the excess energy generated by the photovoltaic system that has not been consumed by the house. We do not monitor the production of the system or the amount of solar photovoltaic energy consumed by the house. Your solar PV contractor should be able to help you monitor system performance. One of the best solar PV watt calculators we`ve found is NREL`s WATTS PV calculator (pvwatts.nrel.gov/). It is a free and very user-friendly calculator. The website uses the physical address where the system is installed.
Next, it asks about the size of the DC system, the type of module, the type of matrix, the inclination of the matrix, and the orientation of the system (the south is the most ideal). Once all the information is entered, the calculator provides an annual estimate as well as a monthly breakdown of the expected production of the solar photovoltaic system. Photovoltaic solar inverters are grid connection systems and must meet the Underwriters Laboratory (UL) 1741 standard, which is a quick shutdown of the system in the event of a power outage. The photovoltaic system is designed to be shut down in the event of a KUA grid failure. This is to protect the customer`s system as well as the utility staff working to restore the outage. The solar photovoltaic system can only continue to work if your system is installed with a backup battery. The solar PV system continues to work to charge your battery system while the batteries provide energy for the home. No. Once the excess energy flows through the meter and into our grid, it becomes a renewable energy credit for which the customer receives compensation on their monthly bill. There are 2 types of solar energy. Solar thermal energy and solar photovoltaic (PV). Solar thermal energy uses energy from the sun to generate heat.
Solar photovoltaic (PV) uses solar energy to produce electricity. The energy generated by the solar photovoltaic system will initially cover the energy needs of the house. Excess energy that is not consumed by the house returns to the KUA network through the meter. The meter records this excess energy and the customer receives a credit on their monthly bill for the energy that their solar PV system has returned to the grid. Every house is different. There are many factors to consider when calculating the value of installing solar photovoltaic systems. We find that customers who are mainly at home during the day tend to benefit more from installing solar PV systems. Our free solar home energy audit explains how to calculate energy savings to determine the total value of installing a solar PV system. We strongly recommend that our customers consider a kua free home solar energy audit before purchasing a system, but this is not a requirement.
.